VoIP PBX

Specifications:

• Eight T1/E1 ports with a single PCI interface for high performance voice and data applications.
• TDM clocking mode: Network timing can be passed from a network-connected DS0 to-any or all of the other ports. Both T1 and E1 are supported simultaneously, making it possible to mix T1 channel banks and E1 networks with full channel synchronization.
• Line decoding: HDB3, AMI, B8ZS. Framing: CRC4, no-CRC4, ESF, D4T1/E1.
• Support for the Asterisk ™, OPAL ™ Yate, FreeSwitch ™ PBX / IVR projects, as well as other Open Source and proprietary PBX / Switch / IVR / VoIP gateway applications.
• All Sangoma's AFT products, Including the A108 card use the PCI interface card based examination, the examination and professionally engineered firmware on the Same Family of Field Programmable Gate Arrays.
• A108, A108d PCI: Fully PCI 2.2 compliant, compatible with all Commercially available motherboards, proper interrupt sharing without manual tuning.
• A108-X, PCI-X A108d Express: 1 Lane PCI Express bus.
• Dimensions: 2U Form factor: 120mm x 55 mm for use in restricted chassis.
• Short 2U compatible mounting clips included for installation in 2U rackmount servers.
• High quality, tested RJ45 cables included. Power: 800mA peak, operational 300mA max at +3.3 v or 5v.Temperature range: 0 - 50C. Compatibility with 5v and 3.3v autosense PCI busses.
• Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes. Field upgradeable know That New features related to voice and / or data can be added When They Become available.
• 32-bit bus master DMA data exchanges across PCI interface at minimum host processor intervention for 132Mbytes/sec.
• Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
• Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
• T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data / TDM voice applications.
• Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
• EDAC ™ (patent pending) technology will be integrated to drastically reduce the cost of echo cancellation.
• Field upgradeable hardware allows for new TDM-related functions to be added As They Become available.
• Raw bitstream interfaces can be used to support arbitrary non-standard line protocols Such as non-byte aligned monosynch bisynch ago.
• WAN data connection is supported by Sangoma's standard WANPIPE ® routing stack, and is independent of TDM voice Completely application for total system reliability.
• Supports WANPIPE ® certified, field tested and reliable Frame Relay, PPP, HDLC and X.25.
• Optional DSP daughterboard on the A108d
• G.168-2002 echo cancellation in hardware.
• 1024 taps/128ms tail per channel on all 256 channels.
• DTMF decoding and tone recognition.
• Voice quality enhancement: Octasic music protection, acoustic echo control and adaptive noise reduction.

The manufacturer's page: A108

Tags: Call Center Systems | VoIP PBX | Asterisk Consultant Naples | PBX Phone | VoIP | Asterisk CTI | PBX | IP Phones | Networking | Linux

Specifications:

• Four T1/E1 ports with a single PCI or PCI-Express interface optimized for high performance voice and data applications.
• Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to-any or all of the other ports, T1 and E1 know Both are supported simultaneously.
• Support for Asterisk ®, Yate ™, FreeSwitch ™ and CallWeaver ™ PBX / IVR Projects, as well as other open source and proprietary PBX, Switch, IVR or VoIP gateway applications.
• All of Sangoma's AFT products use the PCI interface card based examination. Fully compatible with all Commercially available motherboards-proper PCI-standard interrupt sharing without manual tuning.
• Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis.
• Includes high-quality, tested RJ45 cables and short 2U mounting clips for installation in 2U rack-mount servers.
• Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and / or on When They Become available.
• Autosense compatibility with 5V and 3.3V PCI busses.
• Line decoding: HDB3, AMI, B8ZS.
• Framing: CRC-4, no CRC4, ESF, SF, D4T1/E1. Also compatible with Japan's J1.
• A104-X and A104D-X PCI Express: 1 Lane PCI Express bus.
• Power: 800 mA peak, operational 300 mA max at +3.3 V or 5 V.
• Temperature range: 0-50 ° C.
• 32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes / sec for minimum host processor intervention.
• Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
• Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
• T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data / TDM voice applications.
• Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
• Uses raw bitstream interfaces to support arbitrary non-standard line protocols, Such as non-byte aligned monosynch bisynch ago.
• WANPIPE ® routing stack is Completely independent of TDM voice application for total system reliability.
• Supports WANPIPE ® certified, field-tested and reliable Frame Relay, PPP, HDLC, and X.25.
• Optional DSP Hardware Echo Canceller Daughterboard
• G.168-2002 echo cancellation in hardware.
• Taps/128 1024 ms tail per channel on all channel densities.
• DTMF decoding and tone recognition.
• Voice quality enhancement: Octasic ® music protection, acoustic echo control, and adaptive noise reduction.

The manufacturer's page: A104

Tags: Call Center Systems | VoIP PBX | Asterisk Consultant Naples | PBX Phone | VoIP | Asterisk CTI | PBX | IP Phones | Networking | Linux

Specifications:

• Two T1/E1 ports with a single PCI or PCI-Express interface optimized for high performance voice and data applications.
• Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to-any or all of the other ports, T1 and E1 know Both are supported simultaneously.
• Support for Asterisk ®, Yate ™, FreeSwitch ™ and CallWeaver ™ PBX / IVR Projects, as well as other open source and proprietary PBX, Switch, IVR or VoIP gateway applications.
• All of Sangoma's AFT products use the PCI interface card based examination. Fully compatible with all Commercially available motherboards-proper PCI-standard interrupt sharing without manual tuning.
• Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis.
• Includes high-quality, tested RJ45 cables and short 2U mounting clips for installation in 2U rack-mount servers.
• Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and / or on When They Become available.
• Autosense compatibility with 5V and 3.3V PCI busses.
• Line decoding: HDB3, AMI, B8ZS.
• Framing: CRC-4, no CRC4, ESF, SF, D4T1/E1. Also compatible with Japan's J1.
• A102-X and A102D-X PCI Express: 1 Lane PCI Express bus.
• Power: 800 mA peak, operational 300 mA max at +3.3 V or 5 V.
• Temperature range: 0-50 ° C.
• 32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes / sec for minimum host processor intervention.
• Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
• Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
• T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data / TDM voice applications.
• Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
• T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data / TDM voice applications.
• Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
• Uses raw bitstream interfaces to support arbitrary non-standard line protocols, Such as non-byte aligned monosynch bisynch ago.
• WANPIPE ® routing stack is Completely independent of TDM voice application for total system reliability.
• Supports WANPIPE ® certified, field-tested and reliable Frame Relay, PPP, HDLC, and X.25.

The manufacturer's website: A102

Tags: Call Center Systems | VoIP PBX | Asterisk Consultant Naples | PBX Phone | VoIP | Asterisk CTI | PBX | IP Phones | Networking | Linux

Specifications:

• One T1/E1 port with optimum PCI Express or PCI interface for high performance voice and data applications.
• Line decoding: HDB3, AMI, B8ZS.
• Framing: CRC-4, no CRC4, ESF, SF, D4. Also compatible with Japan's J1.
• Support for AsteriskTM, YateTM, FreeSwitchTM and PBX / IVR Projects, as well as other open source and proprietary PBX / Switch / IVR / VoIP gateway applications.
• All of Sangoma's AFT products use the PCI interface card based examination and the examination professionally engineered firmware on the examination of Field Upgradeable Gate Arrays family.
• Fully compatible with all Commercially available motherboards-proper PCI-standard interrupt sharing without manual tuning.
• A101-X and A101D-X PCI Express: 1 Lane PCI Express bus.
• Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis.
• Includes high quality, tested RJ45 cables and short 2U mounting clips for installation in 2U rack-mount servers.
• Power: 800 mA peak, operational 300 mA max at +3.3 V or 5 V.
• Temperature range: 0-50 ° C.
• Autosense compatibility with 5 V and 3.3 V PCI busses.
• Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and / or on When They Become available.
• 32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes / sec for minimum host processor intervention.
• Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
• Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
• T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data / TDM voice applications.
• Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
• Use raw bitstream interfaces to support arbitrary non-standard line protocols, Such as non-byte aligned monosynch bisynch ago.
• WANPIPE ® routing stack is Completely independent of TDM voice application for total system reliability.
• Supports WANPIPE ® certified, field-tested and reliable Frame Relay, PPP, HDLC, and X.25.
• Optional DSP daughterboard on the A101D
• G.168-2002 echo cancellation in hardware.
• 1014 taps/128ms tail per channel on all 256 channels.
• DTMF decoding and tone recognition.
• Voice quality enhancement: Octasic music protection, acoustic echo control, and adaptive noise reduction.

The manufacturer's website: AFT A101

Tags: Call Center Systems | VoIP PBX | Asterisk Consultant Naples | PBX Phone | VoIP | Asterisk CTI | PBX | IP Phones | Networking | Linux

Specifications:

• From 2 to 24 ports are supported. Mix TE and NT modes, as required. Changing modes Requires no jumpers - simply invert the color-coded module.
• Supports Asterisk ®, Yate ™, FreeSwitch ™, CallWeaver ™, PBX / IVR projects, as well as other Open Source and proprietary PBX, Switch, IVR or VoIP gateway applications.
• Single synchronous PCI and PCI Express interface for all 24 BRI interfaces.
• Six ports for RemoraTM card.
• Dimensions: 2U Form factor: 187mm x 55mm for use in restricted chassis.
• Short 2U compatible mounting clips included for installation in 2U rackmount servers and high quality, tested 2m 8-pin RJ45 port splitter cables included.
• 32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes / sec for minimum host processor intervention.
• Autosense compatibility with 5 V and 3.3 V PCI busses.
• Fully PCI 2.2 and PCI Express compliant, compatible with all Commercially available motherboards, proper sharing of PCI interrupts.
• Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and / or on When They Become available.
• Power: 800mA peak, operational 300mA max at +3.3 V or 5 V.
• Temperature range: 0 to 50 ° C.
• Optimized DMA stream and hardware-level HDLC handling unload the host CPU.
• Raw bitstream interfaces can be used to support arbitrary non-standard line protocols, Such as non-byte aligned monosynch bisynch ago.
  Supports WANPIPE ® certified, field tested, and reliable Frame Relay, PPP, HDLC and X.25.

The manufacturer's page: A500 BRI

Tags: Call Center Systems | VoIP PBX | Asterisk Consultant Naples | PBX Phone | VoIP | Asterisk CTI | PBX | IP Phones | Networking | Linux