A104 Quad T1 / E1 / J1

settembre 26th. Sangoma , Digital Cards , Cards VoIP- September 26th. 2007, 12:04 am

a104.jpg

Specifications:

  • Four T1/E1 ports with a single PCI or PCI-Express interface optimized for high performance voice and data applications.
  • Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to Any or all of the other ports, I know Both T1 and E1 are supported simultaneously.
  • Support for Asterisk ®, Yate ™, ™ and CallWeaver FreeSWITCH ™ PBX / IVR Projects, as well as other open source and proprietary PBX, Switch, IVR or VoIP gateway applications.
  • All of Sangoma's AFT products use the Same basic PCI interface card. Fully compatible with all Commercially available motherboards-proper PCI-standard interrupt sharing without manual tuning.
  • Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis.
  • Includes high-quality, tested RJ45 cables and short 2U mounting clips for installation in 2U rack-mount servers.
  • Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and / or date When They Become available.
  • Autosense compatibility with 5V and 3.3V PCI busses.
  • Line decoding: HDB3, AMI, B8ZS.
  • Framing: CRC-4, not CRC4, ESF, SF, D4T1/E1. Also compatible with Japan's J1.
  • A104-X and A104D-X PCI Express: 1 Lane PCI Express bus.
  • Power: 800 mA peak, operational 300mA max at +3.3 V or 5 V.
  • Temperature range: 0-50 ° C.
  • 32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes / sec for minimum host processor intervention.
  • Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
  • Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
  • T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data / TDM voice applications.
  • Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
  • Uses raw bitstream interfaces to support Arbitrary non-standard line protocols, Such as non-byte aligned monosynch bisynch ago.
  • WANPIPE ® routing stack is Completely independent of TDM voice application for total system reliability.
  • WANPIPE ® vertical supports certified, field-tested, and reliable Frame Relay, PPP, HDLC and X.25.
  • Optional DSP Hardware Echo Canceller Daughterboard
  • G.168-2002 echo cancellation in hardware.
  • 1024 taps/128 ms tail per channel on all channel densities.
  • DTMF decoding and tone recognition.
  • Voice quality enhancement: Octasic ® music protection, acoustic echo control, and adaptive noise reduction.

Page Manufacturer: A104

[Slashdot] [Digg] [Reddit] [Del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tags: Call Center Systems | VoIP PBX | Asterisk Consultant Naples | PBX | Voip | Asterisk CTI | PBX | IP Phones | Networking | Linux


Development of IVR systems, callcenter, PBX Voip.