Archivio per la Categoria 'Schede-VoIP'

A108 Octal T1 / E1 / J1

a108.jpg

Caratteristiche tecniche:

  • Eight T1/E1 ports with a single PCI interface for high performance voice and data applications.
  • TDM clocking mode: Network timing can be passed from a network -connected DS0 to any or all of the other ports. Both T1 and E1 are supported simultaneously, making it possible to mix T1 channel banks and E1 networks with full channel synchronization.
  • Line decoding: HDB3, AMI, B8ZS. Framing: CRC4, non-CRC4, ESF, D4T1/E1.
  • Support for the Asterisk™, OPAL™ Yate, FreeSwitch™ PBX/IVR projects, as well as other Open Source and proprietary PBX/Switch/IVR/VoIP gateway applications.
  • All Sangoma’s AFT products, including the A108 card use the same base PCI interface card, and the same professionally engineered firmware on the same family of Field Programmable Gate Arrays.
  • A108, A108d PCI: Fully PCI 2.2 compliant, compatible with all commercially available motherboards, proper interrupt sharing without manual tuning.
  • A108-X, A108d-X PCI Express: 1 Lane PCI Express bus.
  • Dimensions: 2U Form factor: 120mm x 55 mm for use in restricted chassis.
  • Short 2U compatible mounting clips included for installation in 2U rackmount servers.
  • High quality, tested RJ45 cables included. Power: 800mA peak, operational 300mA max at +3.3v or 5v.Temperature range: 0 – 50C. Autosense compatibility with 5v and 3.3v PCI busses.
  • Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes. Field upgradeable so that new features related to voice and/or data can be added when they become available.
  • 32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention.
  • Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
  • Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
  • T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.
  • Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
  • EDAC™ (patent pending) technology will be integrated to drastically reduce the cost of echo cancellation.
  • Field upgradeable hardware allows for new TDM-related functions to be added as they become available.
  • Raw bitstream interfaces can be used to support arbitrary non-standard line protocols such as non-byte aligned monosynch or bisynch.
  • WAN data connection is supported by Sangoma’s standard WANPIPE® routing stack, and is completely independent of TDM voice application for total system reliability.
  • WANPIPE® supports certified, field tested and reliable Frame Relay, PPP, HDLC and X.25.
  • Optional DSP daughterboard on the A108d
  • G.168-2002 echo cancellation in hardware.
  • 1024 taps/128ms tail per channel on all 256 channels.
  • DTMF decoding and tone recognition.
  • Voice quality enhancement: Octasic music protection, acoustic echo control and adaptive noise reduction.

Pagina del produttore: A108

[Slashdot] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tag: Sistemi di Call Center | Centralino Voip | Consulente Asterisk Napoli | Centralino Telefonico | Voip | Asterisk CTI | PBX | Telefoni IP | Networking | Linux


Sviluppo di IVR, sistemi di callcenter, PBX Voip.

A104 Quad T1 / E1 / J1

a104.jpg

Caratteristiche tecniche:

  • Four T1/E1 ports with a single PCI or PCI-Express interface optimized for high performance voice and data applications.
  • Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to any or all of the other ports, so both T1 and E1 are supported simultaneously.
  • Support for Asterisk®, Yate™, CallWeaver™ and FreeSwitch™ PBX/IVR Projects, as well as other open source and proprietary PBX, Switch, IVR, or VoIP gateway applications.
  • All of Sangoma’s AFT products use the same base PCI interface card. Fully compatible with all commercially available motherboards—proper PCI-standard interrupt sharing without manual tuning.
  • Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis.
  • Includes high-quality, tested RJ45 cables and short 2U mounting clips for installation in 2U rack-mount servers.
  • Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and/or data when they become available.
  • Autosense compatibility with 5V and 3.3V PCI busses.
  • Line decoding: HDB3, AMI, B8ZS.
  • Framing: CRC-4, Non CRC4, ESF, SF, D4T1/E1. Also compatible with Japan’s J1.
  • A104-X and A104D-X PCI Express: 1 Lane PCI Express bus.
  • Power: 800 mA peak, operational 300 mA max at +3.3 V or 5 V.
  • Temperature range: 0–50 °C.
  • 32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention.
  • Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
  • Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
  • T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.
  • Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
  • Uses raw bitstream interfaces to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch.
  • WANPIPE® routing stack is completely independent of TDM voice application for total system reliability.
  • WANPIPE® supports certified, field-tested, and reliable Frame Relay, PPP, HDLC, and X.25.
  • Optional DSP Hardware Echo Canceller Daughterboard
  • G.168–2002 echo cancellation in hardware.
  • 1024 taps/128 ms tail per channel on all channel densities.
  • DTMF decoding and tone recognition.
  • Voice quality enhancement: Octasic® music protection, acoustic echo control, and adaptive noise reduction.

Pagina del produttore: A104

[Slashdot] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tag: Sistemi di Call Center | Centralino Voip | Consulente Asterisk Napoli | Centralino Telefonico | Voip | Asterisk CTI | PBX | Telefoni IP | Networking | Linux


Sviluppo di IVR, sistemi di callcenter, PBX Voip.

AFT A102 / A102D Dual T1 / E1 / J1

a102.jpg

Caratteristiche tecniche:

  • Two T1/E1 ports with a single PCI or PCI-Express interface optimized for high performance voice and data applications.
  • Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to any or all of the other ports, so both T1 and E1 are supported simultaneously.
  • Support for Asterisk®, Yate™, CallWeaver™ and FreeSwitch™ PBX/IVR Projects, as well as other open source and proprietary PBX, Switch, IVR, or VoIP gateway applications.
  • All of Sangoma’s AFT products use the same base PCI interface card. Fully compatible with all commercially available motherboards—proper PCI-standard interrupt sharing without manual tuning.
  • Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis.
  • Includes high-quality, tested RJ45 cables and short 2U mounting clips for installation in 2U rack-mount servers.
  • Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and/or data when they become available.
  • Autosense compatibility with 5V and 3.3V PCI busses.
  • Line decoding: HDB3, AMI, B8ZS.
  • Framing: CRC-4, Non CRC4, ESF, SF, D4T1/E1. Also compatible with Japan’s J1.
  • A102-X and A102D-X PCI Express: 1 Lane PCI Express bus.
  • Power: 800 mA peak, operational 300 mA max at +3.3 V or 5 V.
  • Temperature range: 0–50 °C.
  • 32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention.
  • Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
  • Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
  • T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.
  • Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
  • T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.
  • Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
  • Uses raw bitstream interfaces to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch.
  • WANPIPE® routing stack is completely independent of TDM voice application for total system reliability.
  • WANPIPE® supports certified, field-tested, and reliable Frame Relay, PPP, HDLC, and X.25.

Sito del produttore: A102

[Slashdot] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tag: Sistemi di Call Center | Centralino Voip | Consulente Asterisk Napoli | Centralino Telefonico | Voip | Asterisk CTI | PBX | Telefoni IP | Networking | Linux


Sviluppo di IVR, sistemi di callcenter, PBX Voip.

AFT A101 / A101D Single T1 / E1 / J1

a101.jpg

Caratteristiche tecniche:

  • One T1/E1 port with optimum PCI Express or PCI interface for high performance voice and data applications.
  • Line decoding: HDB3, AMI, B8ZS.
  • Framing: CRC-4, Non CRC4, ESF, SF, D4. Also compatible with Japan’s J1.
  • Support for AsteriskTM, YateTM, and FreeSwitchTM PBX/IVR Projects, as well as other open source and proprietary PBX/Switch/IVR/VoIP gateway applications.
  • All of Sangoma’s AFT products use the same base PCI interface card and the same professionally engineered firmware on the same family of Field Upgradeable Gate Arrays.
  • Fully compatible with all commercially available motherboards—proper PCI-standard interrupt sharing without manual tuning.
  • A101-X and A101D-X PCI Express: 1 Lane PCI Express bus.
  • Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis.
  • Includes high quality, tested RJ45 cables and short 2U mounting clips for installation in 2U rack mount servers.
  • Power: 800 mA peak, operational 300 mA max at +3.3 V or 5 V.
  • Temperature range: 0–50 °C.
  • Autosense compatibility with 5 V and 3.3 V PCI busses.
  • Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and/or data when they become available.
  • 32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention.
  • Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
  • Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
  • T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.
  • Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
  • Use raw bitstream interfaces to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch.
  • WANPIPE® routing stack is completely independent of TDM voice application for total system reliability.
  • WANPIPE® supports certified, field-tested, and reliable Frame Relay, PPP, HDLC, and X.25.
  • Optional DSP daughterboard on the A101D
  • G.168–2002 echo cancellation in hardware.
  • 1014 taps/128ms tail per channel on all 256 channels.
  • DTMF decoding and tone recognition.
  • Voice quality enhancement: Octasic music protection, acoustic echo control, and adaptive noise reduction.

Sito del produttore: AFT A101

[Slashdot] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tag: Sistemi di Call Center | Centralino Voip | Consulente Asterisk Napoli | Centralino Telefonico | Voip | Asterisk CTI | PBX | Telefoni IP | Networking | Linux


Sviluppo di IVR, sistemi di callcenter, PBX Voip.

A500 BRI

a500.jpg

Caratteristiche tecniche:

  • From 2 to 24 ports are supported. Mix TE and NT modes, as required. Changing modes requires no jumpers — simply invert the colour-coded module.
  • Supports Asterisk®, Yate™,   FreeSwitch™,   CallWeaver™, PBX/IVR projects, as well as other Open Source and proprietary PBX, Switch, IVR or VoIP gateway applications.
  • Single synchronous PCI and PCI Express interface for all 24 BRI interfaces.
  • Six ports per RemoraTM card.
  • Dimensions: 2U Form factor: 187mm x 55mm for use in restricted chassis.
  • Short 2U compatible mounting clips included for installation in 2U rackmount servers and high quality, tested 2m 8-pin RJ45 port splitter cables included.
  • 32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention.
  • Autosense compatibility with 5 V and 3.3 V PCI busses.
  • Fully PCI 2.2 and PCI Express compliant, compatible with all commercially available motherboards, proper sharing of PCI interrupts.
  • Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and/or data when they become available.
  • Power: 800mA peak, operational 300mA max at +3.3 V or 5 V.
  • Temperature range: 0 – 50°C.
  • Optimized DMA stream and hardware-level HDLC handling unload the host CPU.
  • Raw bitstream interfaces can be used to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch.
    WANPIPE® supports certified, field tested, and reliable Frame Relay, PPP, HDLC and X.25.

Pagina del produttore: A500 BRI

[Slashdot] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tag: Sistemi di Call Center | Centralino Voip | Consulente Asterisk Napoli | Centralino Telefonico | Voip | Asterisk CTI | PBX | Telefoni IP | Networking | Linux


Sviluppo di IVR, sistemi di callcenter, PBX Voip.

A400 FXO/FXS

A400.jpg

Caratteristiche tecniche:

  • From 2 to 48 ports supported, mixing FXO and FXS interfaces as required.
  • Support for the Asterisk™, Yate™, FreeSwitch™, CallWeaver™, OPAL™ PBX/IVR projects, as well as other Open Source and proprietary PBX/Switch/IVR/VoIP gateway applications.
  • Single synchronous PCI interface up to 48 FXO/FXS ports.
  • Connects to punch block using a standard 12-line colour coded telephone cable. (Included.)
  • Dimensions: 2U height form factor: 290mm x 55mm for use in a 2U chassis.
  • Short 2U compatible mounting clips available for installation in 2U rack mount servers.
  • 32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention.
  • Autosense compatibility with 5 V and 3.3 V PCI busses.
  • Fully PCI 2.2 compliant, compatible with all commercially available motherboards, proper interrupts sharing.
  • Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes. Field upgradeable so that new features related to voice and/or data can be added when they become available.
  • Power: 800mA peak, operational 300mA max at +3.3 V or 5 V.
  • Temperature range: 0 – 50C.
  • Optional DSP daughterboard on the A400D
    • G.168-2002 echo cancellation in hardware
    • 1024 taps/128ms tail per channel on all channel densities
    • DTMF decoding and tone recognition
    • Voice quality enhancement: Octasic music protection, acoustic echo control and adaptive noise reduction.
    • No CPU Load

Sito del produttore: A400 FXO/FXS

[Slashdot] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tag: Sistemi di Call Center | Centralino Voip | Consulente Asterisk Napoli | Centralino Telefonico | Voip | Asterisk CTI | PBX | Telefoni IP | Networking | Linux


Sviluppo di IVR, sistemi di callcenter, PBX Voip.

A200 FXO/FXS

A200.jpg

Caratteristiche tecniche:

  • From 2 to 24 ports supported, mixing FXO and FXS interfaces, as required.
  • Support for the Asterisk™, Yate™, FreeSwitch™, CallWeaver™, OPAL™ PBX/IVR projects, as well as other Open Source and proprietary PBX/Switch/IVR/VoIP gateway applications.
  • Single synchronous PCI interface for all 24 FXO/FXS ports.
  • Four RJ11 ports per Remora™ card.
  • Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis.
  • Short 2U compatible mounting clips available for installation in 2U rack-mount servers.
  • 32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention.
  • Autosense compatibility with 5 V and 3.3 V PCI busses.
  • Fully PCI 2.2 compliant, compatible with all commercially available motherboards, proper sharing of PCI interrupts.
  • Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes. Field upgradeable so that new features can be added when they become available.
  • Power: 800mA peak, operational 300 mA max at +3.3 V or 5 V.
  • Temperature range: 0 – 50C.
  • Optional DSP Echo Canceller Daughterboard on the A200D
    • G.168-2002 echo cancellation in hardware
    • 1024 taps/128ms tail per channel on all channel densities
    • DTMF decoding and tone recognition
    • Voice quality enhancement: Octasic music protection, acoustic echo control and adaptive noise reduction.
    • No CPU Load

Sito del produttore: A200 FXO/FXS

[Slashdot] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tag: Sistemi di Call Center | Centralino Voip | Consulente Asterisk Napoli | Centralino Telefonico | Voip | Asterisk CTI | PBX | Telefoni IP | Networking | Linux


Sviluppo di IVR, sistemi di callcenter, PBX Voip.